H. Abdul-hameed, T. Messager, G. Ayoub, F. Zaïri, M. Naït-abdelaziz et al., A two-phase hyperelastic-viscoplastic constitutive model for semi-crystalline polymers: application to polyethylene materials with a variable range of crystal fractions, J. Mech. Behav. Biomed. Mater, vol.37, pp.323-332, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01045211

H. Abdul-hameed, T. Messager, F. Zaïri, and M. Naït-abdelaziz, Large-strain viscoelastic-viscoplastic constitutive modeling of semi-crystalline polymers and model identification by deterministic/evolutionary approach, Comput. Mater. Sci, vol.90, pp.241-252, 2014.
URL : https://hal.archives-ouvertes.fr/hal-00991700

S. Ahzi, A. Makradi, R. V. Gregory, and D. D. Edie, Modeling of deformation behavior and strain-induced crystallization in poly(ethylene terephthalate) above the glass transition temperature, Mech. Mater, vol.35, pp.1139-1148, 2003.

K. Anoukou, F. Zaïri, M. Naït-abdelaziz, A. Zaoui, Z. Qu et al., A micromechanical model taking into account the contribution of ?-and ?-crystalline phases in the stiffening of polyamide 6-clay nanocomposites: a closedformulation including the crystal symmetry, Compos. Part B: Eng, vol.64, pp.84-96, 2014.
URL : https://hal.archives-ouvertes.fr/hal-00998475

E. M. Arruda and M. C. Boyce, A three-dimensional constitutive model for the large stretch behavior of rubber elastic materials, J. Mech. Phys. Solids, vol.41, pp.389-412, 1993.
URL : https://hal.archives-ouvertes.fr/hal-01390807

G. Ayoub, F. Zaïri, M. Naït-abdelaziz, and J. M. Gloaguen, Modelling large deformation behaviour under loading-unloading of semicrystalline polymers: application to a high density polyethylene, Int. J. Plast, vol.26, pp.329-347, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00461482

G. Ayoub, F. Zaïri, C. Fréderix, J. M. Gloaguen, M. Naït-abdelaziz et al., Effects of crystal content on the mechanical behaviour of polyethylene under finite strains: experiments and constitutive modelling, Int. J. Plast, vol.27, pp.492-511, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00574734

G. Ayoub, F. Zaïri, M. Naït-abdelaziz, and . Gloaguen, Modeling the low-cycle fatigue behavior of visco-hyperelastic elastomeric materials using a new network alteration theory: application to styrene-butadiene rubber, J. Mech. Phys. Solids, vol.59, pp.473-795, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00557942

G. Ayoub, F. Zaïri, M. Naït-abdelaziz, J. M. Gloaguen, and G. Kridli, A visco-hyperelastic damage model for cyclic stress-softening, hysteresis and permanent set in rubber using the network alteration theory, Int. J. Plast, vol.54, pp.19-33, 2014.
URL : https://hal.archives-ouvertes.fr/hal-00934513

Z. Bartczak and A. Galeski, Plasticity of semicrystalline polymers, Macromol. Symp, vol.294, pp.67-90, 2010.

Z. Bartczak and M. Kozanecki, Influence of molecular parameters on high-strain deformation of polyethylene in the plane-strain compression. Part I. Stress-strain behavior, Polymer, vol.46, pp.8210-8221, 2005.

Z. Bartczak, Influence of molecular parameters on high-strain deformation of polyethylene in the plane-strain compression, Part II. Strain recovery. Polymer, vol.46, pp.10339-10354, 2005.

S. Belbachir, F. Zaïri, G. Ayoub, U. Maschke, M. Naït-abdelaziz et al., Modelling of photodegradation effect on elastic-viscoplastic behaviour of amorphous polylactic acid films, J. Mech. Phys. Solids, vol.58, pp.241-255, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00447104

H. Ben-hadj-hamouda, L. Laiarinandrasana, and R. Piques, Viscoplastic behaviour of a medium density polyethylene (MDPE): constitutive equations based on double nonlinear deformation model, Int. J. Plast, vol.23, pp.1307-1327, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00154584

J. S. Bergstrom, S. M. Kurtz, C. M. Rimnac, and A. A. Edidin, Constitutive modeling of ultra-high molecular weight polyethylene under large-deformation and cyclic loading conditions, Biomaterials, vol.23, pp.2329-2343, 2002.

J. S. Bergstrom, C. M. Rimnac, and S. M. Kurtz, Prediction of multiaxial mechanical behavior for conventional and highly crosslinked UHMWPE using a hybrid constitutive model, Biomaterials, vol.24, pp.1365-1380, 2003.

J. S. Bergstrom, C. M. Rimnac, and S. M. Kurtz, An augmented hybrid constitutive model for simulation of unloading and cyclic loading behavior of conventional and highly crosslinked UHMWPE, Biomaterials, vol.25, pp.2171-2178, 2004.

H. Bouasse and Z. Carrière, Sur les courbes de traction du caoutchouc vulcanisé, Ann. Fac. Des. Sci. Toulouse, vol.5, pp.257-283, 1903.

R. Boulahia, J. M. Gloaguen, F. Zaïri, M. Naït-abdelaziz, R. Seguela et al., Deformation behaviour and mechanical properties of polypropylene processed by equal channel angular extrusion: effects of back-pressure and extrusion velocity, Polymer, vol.50, pp.5508-5517, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00429746

M. C. Boyce and E. M. Arruda, Constitutive models of rubber elasticity: a review, Rubber Chem. Technol, vol.73, pp.504-523, 2000.

M. C. Boyce, S. Socrate, and P. G. Llana, Constitutive model for the finite deformation stress-strain behavior of poly(ethylene terephthalate) above the glass transition, Polymer, vol.41, pp.2183-2201, 2000.

F. Bueche, Mullins effect and rubber-filler interaction, J. Appl. Polym. Sci, vol.5, pp.271-281, 1961.

G. Chagnon, E. Verron, G. Marckmann, and L. Gornet, Development of new constitutive equations for the Mullins effect in rubber using the network alteration theory, Int. J. Solids Struct, vol.43, pp.6817-6831, 2006.
URL : https://hal.archives-ouvertes.fr/hal-01006742

A. Cohen, A Padé approximant to the inverse Langevin function, Rheol. Acta, vol.30, pp.270-273, 1991.

O. U. Colak, Modeling deformation behavior of polymers with viscoplasticity theory based on overstress, Int. J. Plast, vol.21, pp.145-160, 2005.

O. U. Colak and N. Dusunceli, Modeling viscoelastic and viscoplastic behavior of high density polyethylene (HDPE), J. Eng. Mater. Technol, vol.128, pp.572-578, 2006.

R. Dargazany and M. Itskov, A network evolution model for the anisotropic Mullins effect in carbon black filled rubbers, Int. J. Solids Struct, vol.46, pp.2967-2977, 2009.

R. Dargazany, V. N. Khiem, and M. Itskov, A generalized network decomposition model for the quasi-static inelastic behavior of filled elastomers, Int. J. Plast, vol.63, pp.94-109, 2014.

A. D. Drozdov and R. K. Gupta, Constitutive equations of finite viscoplasticity of semicrystalline polymers, Int. J. Solids Struct, vol.40, pp.6217-6243, 2003.

A. D. Drozdov and J. C. Christiansen, Thermo-viscoelastic and viscoplastic behavior of high-density polyethylene, Int. J. Solids Struct, vol.45, pp.4274-4288, 2008.

A. D. Drozdov, Mullins' effect in semicrystalline polymers, Int. J. Solids Struct, vol.46, pp.3336-3345, 2009.

A. D. Drozdov, R. Klitkou, and J. C. Christiansen, Cyclic viscoplasticity of semicrystalline polymers with finite deformations, Mech. Mater, vol.56, pp.53-64, 2013.

N. Dusunceli and O. U. Colak, High density polyethylene (HDPE): experiments and modeling, Mech. Time Depend. Mater, vol.10, pp.331-345, 2006.

N. Dusunceli and O. U. Colak, Modelling effects of degree of crystallinity on mechanical behavior of semicrystalline polymers, Int. J. Plast, vol.24, pp.1224-1242, 2008.

M. Elmeguenni, M. Naït-abdelaziz, F. Zaïri, and J. M. Gloaguen, Fracture characterization of high-density polyethylene pipe materials using the J-integral and the essential work of fracture, Int. J. Fract, vol.183, pp.119-133, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00988071

A. Galeski, Z. Bartczak, T. Kazmierczak, and M. Slouf, Morphology of undeformed and deformed polyethylene lamellar crystals, Polymer, vol.51, pp.5780-5787, 2010.

D. Garcia-gonzalez, R. Zaera, and A. Arias, A hyperelastic-thermoviscoplastic constitutive model for semi-crystalline polymers: application to PEEK under dynamic loading conditions, Int. J. Plast, vol.88, pp.27-52, 2017.

K. Hachour, F. Zaïri, M. Naït-abdelaziz, J. M. Gloaguen, M. Aberkane et al., Experiments and modeling of high-crystalline polyethylene yielding under different stress states, Int. J. Plast, vol.54, pp.1-18, 2014.
URL : https://hal.archives-ouvertes.fr/hal-00934549

S. Haouala and I. Doghri, Modeling and algorithms for two-scale time homogenization of viscoelastic-viscoplastic solids under large numbers of cycles, Int. J. Plast, vol.70, pp.98-125, 2015.

J. A. Harwood, L. Mullins, and A. R. Payne, Stress softening in rubbers: a review, J. IRI, vol.1, pp.17-27, 1967.

T. Kazmierczak, A. Galeski, and A. S. Argon, Plastic deformation of polyethylene crystals as a function of crystal thickness and compression rate, Polymer, vol.46, pp.8926-8936, 2005.

F. Khan and E. Krempl, Amorphous and semicrystalline solid polymers: experimental and modeling studies of their inelastic deformation behaviors, J. Eng. Mater. Technol, vol.128, pp.64-72, 2006.

M. Kyomoto, T. Moro, K. Saiga, M. Hashimoto, H. Ito et al., Biomimetic hydration lubrication with various polyelectrolyte layers on cross-linked polyethylene orthopedic bearing materials, Biomaterials, vol.33, pp.4451-4459, 2012.

E. H. Lee, Elastic-plastic deformation at finite strains, J. Appl. Mech, vol.36, pp.1-6, 1969.

G. Marckmann, E. Verron, L. Gornet, G. Chagnon, P. Charrier et al., A theory of network alteration for the Mullins effect, J. Mech. Phys. Solids, vol.50, pp.2011-2028, 2002.
URL : https://hal.archives-ouvertes.fr/hal-01004954

L. Mullins, Softening of rubber by deformation, Rubber Chem. Technol, vol.42, pp.339-362, 1969.

L. Mullins, Effect of stretching on the properties of rubber, Rubber Chem. Technol, vol.21, pp.281-300, 1948.

S. T. Nguyen, S. Castagnet, and J. C. Grandidier, Nonlinear viscoelastic contribution to the cyclic accommodation of high density polyethylene in tension: experiments and modeling, Int. J. Fatigue, vol.55, pp.166-177, 2013.

S. Nikolov and I. Doghri, A micro/macro constitutive model for the small-deformation behavior of polyethylene, Polymer, vol.41, pp.1883-1891, 2000.

S. Nikolov, I. Doghri, O. Pierard, L. Zealouk, and A. Goldberg, Multi-scale constitutive modeling for the small deformations of semi-crystalline polymers, J. Mech. Phys. Solids, vol.50, pp.2275-2302, 2002.

C. Ovalle-rodas, F. Zaïri, and M. Naït-abdelaziz, A finite strain thermo-viscoelastic constitutive model to describe the self-heating in elastomeric materials during lowcycle fatigue, J. Mech. Phys. Solids, vol.64, pp.396-410, 2014.
URL : https://hal.archives-ouvertes.fr/hal-00941557

C. Ovalle-rodas, F. Zaïri, M. Naït-abdelaziz, and P. Charrier, Temperature and filler effects on the relaxed response of filled rubbers: experimental observations on a carbon-filled SBR and constitutive modeling, Int. J. Solids Struct, vol.58, pp.309-321, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01120998

C. Ovalle-rodas, F. Zaïri, M. Naït-abdelaziz, and P. Charrier, A thermo-visco-hyperelastic model for the heat build-up during low-cycle fatigue of filled rubbers: formulation, implementation and experimental verification, Int. J. Plast, vol.79, pp.217-236, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01293120

S. Patlazhan and Y. Remond, Structural mechanics of semicrystalline polymers prior to the yield point: a review, J. Mater. Sci, vol.47, pp.6749-6767, 2012.

A. Pawlak, A. Galeski, and A. Rozanski, Cavitation during deformation of semicrystalline polymers, Progress. Polym. Sci, vol.39, pp.921-958, 2014.

A. J. Peacock, Handbook of Polyethylene: Structures, Properties, and Applications. M. Dekker, 2000.

C. M. Popa, R. Fleischhauer, K. Schneider, and M. Kaliske, Formulation and implementation of a constitutive model for semicrystalline polymers, Int. J. Plast, vol.61, pp.128-156, 2014.

M. Pyrz and F. Zaïri, Identification of viscoplastic parameters of phenomenological constitutive equations for polymers by deterministic and evolutionary approach, Model. Simul. Mater. Sci. Eng, vol.15, pp.85-103, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00192344

S. Ramakrishna, J. Mayer, E. Wintermantel, and K. W. Leong, Biomedical applications of polymer-composite materials: a review, Compos. Sci. Technol, vol.61, pp.1189-1224, 2001.

B. D. Ratner, A. S. Hoffman, F. J. Schoen, and J. E. Lemons, Biomaterials Science: An Introduction to Materials in Medicine, 2013.

A. Rozanski and A. Galeski, Plastic yielding of semicrystalline polymers affected by amorphous phase, Int. J. Plast, vol.41, pp.14-29, 2013.

R. Seguela, V. Gaucher-miri, and S. Elkoun, Plastic deformation of polyethylene and ethylene copolymers. Part I Homogeneous crystal slip and molecular mobility, J. Mater. Sci, vol.33, pp.1273-1279, 1998.

R. Seguela, S. Elkoun, and V. Gaucher-miri, Plastic deformation of polyethylene and ethylene copolymers. Part II Heterogeneous crystal slip and strain-induced phase change, J. Mater. Sci, vol.33, pp.1801-1807, 1998.

A. Shojaei and G. Li, Viscoplasticity analysis of semicrystalline polymers: a multiscale approach within micromechanics framework, Int. J. Plast, vol.42, pp.31-49, 2013.

F. Sidoroff, Un modèle viscoélastique non linéaire avec configuration intermédiaire, J. Méc, vol.13, pp.679-713, 1974.

J. P. Torres, P. M. Frontini, M. Machado, and Z. Major, Deformation and failure of semicrystalline polymers under dynamic tensile and biaxial impact loading, Int. J. Impact Eng, pp.52-61, 2016.

L. R. Treloar, Physics of Rubber Elasticity, 1975.

M. Uchida and N. Tada, Micro-, meso-to macroscopic modeling of deformation behavior of semi-crystalline polymer, Int. J. Plast, vol.49, pp.164-184, 2013.

J. A. Van-dommelen, D. M. Parks, M. C. Boyce, W. A. Brekelmans, and F. P. Baaijens, Micromechanical modeling of the elasto-viscoplastic behavior of semi-crystalline polymers, J. Mech. Phys. Solids, vol.51, pp.519-541, 2003.

M. Wang, J. Shen, J. Li, and S. Guo, Network alteration theory on Mullins effect in semicrystalline polymers, Polym. Int, vol.64, pp.105-112, 2015.

K. Yashiro, M. Naito, S. I. Ueno, and F. Jie, Molecular dynamics simulation of polyethylene under cyclic loading: effect of loading condition and chain length, Int. J. Mech. Sci, vol.52, pp.136-145, 2010.

F. Zaïri, M. Naït-abdelaziz, K. Woznica, and J. M. Gloaguen, Constitutive equations for the viscoplastic-damage behaviour of a rubber-modified polymer, Eur. J. Mech. A/Solids, vol.24, pp.169-182, 2005.

F. Zaïri, K. Woznica, and M. Naït-abdelaziz, Phenomenological nonlinear modelling of glassy polymers, C. R. Mec, vol.333, pp.359-364, 2005.

F. Zaïri, B. Aour, J. M. Gloaguen, M. Naït-abdelaziz, and J. M. Lefebvre, Numerical modelling of elastic-viscoplastic equal channel angular extrusion process of a polymer, Comput. Mater. Sci, vol.38, pp.202-216, 2006.

F. Zaïri, M. Naït-abdelaziz, K. Woznica, and J. M. Gloaguen, Elasto-viscoplastic constitutive equations for the description of glassy polymers behavior at constant strain rate, ASME J. Eng. Mater. Technol, vol.129, pp.29-35, 2007.

F. Zaïri, M. Naït-abdelaziz, J. M. Gloaguen, and J. M. Lefebvre, Modelling of the elasto-viscoplastic damage behaviour of glassy polymers, Int. J. Plast, vol.24, pp.945-965, 2008.

F. Zaïri, M. Naït-abdelaziz, J. M. Gloaguen, and J. M. Lefebvre, Constitutive modelling of the large inelastic deformation behaviour of rubber-toughened poly(methyl methacrylate): effects of strain rate, temperature and rubber-phase volume fraction, Model. Simul. Mater. Sci. Eng, vol.18, pp.1-22, 2010.

F. Zaïri, M. Naït-abdelaziz, J. M. Gloaguen, and J. M. Lefebvre, A physically-based constitutive model for anisotropic damage in rubber-toughened glassy polymers during finite deformation, Int. J. Plast, vol.27, pp.25-51, 2011.

F. Zeng, P. Le-grognec, M. F. Lacrampe, and P. Krawczak, A constitutive model for semi-crystalline polymers at high temperature and finite plastic strain: application to PA6 and PE biaxial stretching, Mech. Mater, vol.42, pp.686-697, 2010.
URL : https://hal.archives-ouvertes.fr/hal-01773156

C. Zhang and I. D. Moore, Nonlinear mechanical response of high density polyethylene. Part II: uniaxial constitutive modeling, Polym. Eng. Sci, vol.37, pp.413-420, 1997.