E. R. Ahlmann, L. R. Menendez, C. Kermani, and H. Gotha, Survivorship and clinical outcome of modular endoprosthetic reconstruction for neoplastic disease of the lower limb, J. Bone Joint Surg. Br, vol.88, pp.790-795, 2006.

T. Albrektsson, J. , and C. , Osteoinduction, osteoconduction and osseointegration, Eur. Spine J, vol.10, pp.96-101, 2001.

H. T. Aro and A. J. Aho, Clinical use of bone allografts, Ann. Med, vol.25, pp.403-412, 1993.

J. Aronson, B. H. Harrison, C. L. Stewart, and J. H. Harp, The histology of distraction osteogenesis using different external fixators, Clin. Orthop. Relat. Res, vol.241, pp.106-116, 1989.

V. T. Athanasiou, D. J. Papachristou, A. Panagopoulos, A. Saridis, C. D. Scopa et al., Histological comparison of autograft, allograft-DBM, xenograft, and synthetic grafts in a trabecular bone defect: an experimental study in rabbits, Med. Sci. Monit, vol.16, pp.24-31, 2010.

M. L. Azi, A. A. Teixeira, R. B. Cotias, A. Joeris, and M. Kfuri, Inducedmembrane technique in the management of posttraumatic bone defects, JBJS Essent. Surg. Tech, vol.9, p.22, 2019.

K. Bakri, A. A. Stans, S. Mardini, and S. L. Moran, Combined massive allograft and intramedullary vascularized fibula transfer: the capanna technique for lower-limb reconstruction, Semin. Plast. Surg, vol.22, pp.234-241, 2008.

M. R. Bansal, S. B. Bhagat, and D. D. Shukla, Bovine cancellous xenograft in the treatment of tibial plateau fractures in elderly patients, Int. Orthop, vol.33, pp.779-784, 2009.

V. Barbarossa, B. R. Matkovi?, N. Vuci?, M. Bielen, and M. Gluhini?, Treatment of osteomyelitis and infected non-union of the femur by a modified Ilizarov technique: follow-up study, Croat. Med. J, vol.42, pp.634-641, 2001.

L. Benning, L. Gutzweiler, K. Trondle, J. Riba, R. Zengerle et al., Assessment of hydrogels for bioprinting of endothelial cells, J. Biomed. Mater. Res. A, vol.106, pp.935-947, 2018.

L. S. Bertol, R. Schabbach, and L. A. Santos, Dimensional evaluation of patient-specific 3D printing using calcium phosphate cement for craniofacial bone reconstruction, J. Biomater. Appl, vol.31, pp.799-806, 2016.

R. Bosc, B. Hersant, R. Carloni, J. Niddam, J. Bouhassira et al., Mandibular reconstruction after cancer: an in-house approach to manufacturing cutting guides, Int. J. Oral Maxillofac. Surg, vol.46, pp.24-31, 2017.

M. P. Bostrom and D. A. Seigerman, The clinical use of allografts, demineralized bone matrices, synthetic bone graft substitutes and osteoinductive growth factors: a survey study, HSS J, vol.1, pp.9-18, 2005.

W. Brown and L. Chow, A new calcium-phosphate setting cement, J. Dent. Res, vol.62, pp.672-672, 1983.

W. E. Brown, A new calcium phosphate, water-setting cement, pp.351-379, 1987.

G. Brunello, S. Sivolella, R. Meneghello, L. Ferroni, C. Gardin et al., Powder-based 3D printing for bone tissue engineering, Biotechnol. Adv, vol.34, pp.740-753, 2016.

A. S. Brydone, D. Meek, and S. Maclaine, Bone grafting, orthopaedic biomaterials, and the clinical need for bone engineering, Proc. Inst. Mech. Eng, vol.224, pp.1329-1343, 2010.

R. W. Bucholz, A. Carlton, and R. E. Holmes, Hydroxyapatite and tricalcium phosphate bone graft substitutes, Orthop. Clin. North Am, vol.18, pp.323-334, 1987.

Y. Cao, J. P. Vacanti, K. T. Paige, J. Upton, and C. A. Vacanti, Transplantation of chondrocytes utilizing a polymer-cell construct to produce tissue-engineered cartilage in the shape of a human ear, Plast. Reconstr. Surg, vol.100, pp.297-302, 1997.

R. Capanna, C. Bufalini, and M. Campanacci, A new technique for reconstructions of large metadiaphyseal bone defects, Orthop. Traumatol, vol.2, pp.159-177, 1993.

S. Careri, R. Vitiello, M. S. Oliva, A. Ziranu, G. Maccauro et al., Masquelet technique and osteomyelitis: innovations and literature review, Eur. Rev. Med. Pharmacol. Sci, vol.23, issue.2, pp.210-216, 2019.

J. Cesarano-iii, J. G. Dellinger, M. P. Saavedra, D. D. Gill, R. D. Jamison et al., Customization of load-bearing hydroxyapatite lattice scaffolds, Int. J. Appl. Ceram. Technol, vol.2, pp.661-687, 2005.

M. Cheng, E. M. Brey, B. G. Ulusal, and F. Wei, Mandible augmentation for osseointegrated implants using tissue engineering strategies, Plast. Reconstr. Surg, vol.118, pp.1-4, 2006.

S. Choi, Y. Oh, K. Park, J. Lee, J. Shim et al., New clinical application of three-dimensional-printed polycaprolactone/?tricalcium phosphate scaffold as an alternative to allograft bone for limb-sparing surgery in a dog with distal radial osteosarcoma, J. Vet. Med. Sci, vol.81, pp.434-439, 2019.

P. F. Choong, F. H. Sim, D. J. Pritchard, M. G. Rock, and E. Y. Chao, Megaprostheses after resection of distal femoral tumors. A rotating hinge design in 30 patients followed for 2-7 years, Acta Orthop. Scand, vol.67, pp.345-351, 1996.

A. Colin and J. Boire, A novel tool for rapid prototyping and development of simple 3D medical image processing applications on PCs, 1997.

. Comput, Methods Programs Biomed, vol.53, pp.87-92

L. Coquelin, A. Fialaire-legendre, S. Roux, A. Poignard, P. Bierling et al., In vivo and in vitro comparison of three different allografts vitalized with human mesenchymal stromal cells, Tissue Eng. Part A, vol.18, pp.1921-1931, 2012.

X. Cui, T. Boland, D. D. D'lima, and M. K. Lotz, Thermal inkjet printing in tissue engineering and regenerative medicine. Recent Pat, Drug Deliv. Formul, vol.6, pp.149-155, 2012.

G. Daculsi, R. Z. Legeros, E. Nery, K. Lynch, and B. Kerebel, Transformation of biphasic calcium phosphate ceramics in vivo: ultrastructural and physicochemical characterization, J. Biomed. Mater. Res, vol.23, pp.883-894, 1989.

C. R. Deckard, Method and Apparatus for Producing Parts by Selective Sintering, vol.863, 1989.

R. Dimitriou, E. Jones, D. Mcgonagle, and P. V. Giannoudis, Bone regeneration: current concepts and future directions, BMC Med, vol.9, p.66, 2011.

A. Dupret-bories, S. Vergez, T. Meresse, F. Brouillet, and G. Bertrand, Contribution of 3D printing to mandibular reconstruction after cancer, 2018.
URL : https://hal.archives-ouvertes.fr/hal-02338495

A. , Head Neck Dis, vol.135, pp.133-136

P. S. Eggli, W. Muller, and R. K. Schenk, Porous hydroxyapatite and tricalcium phosphate cylinders with two different pore size ranges implanted in the cancellous bone of rabbits. A comparative histomorphometric and histologic study of bony ingrowth and implant substitution, Clin. Orthop. Relat. Res, vol.232, pp.127-138, 1988.

R. R. Elliot and R. H. Richards, Failed operative treatment in two cases of pseudarthrosis of the clavicle using internal fixation and bovine cancellous xenograft (Tutobone), J. Pediatr. Orthop, vol.20, pp.349-353, 2011.

F. Fahimipour, M. Rasoulianboroujeni, E. Dashtimoghadam, K. Khoshroo, M. Tahriri et al., 3D printed TCP-based scaffold incorporating VEGF-loaded PLGA microspheres for craniofacial tissue engineering, Dent. Mater, vol.33, pp.1205-1216, 2017.

C. Faldini, M. T. Miscione, F. Acri, M. Chehrassan, M. Bonomo et al., Use of homologous bone graft in the treatment of aseptic forearm nonunion, Musculoskelet. Surg, vol.95, pp.31-35, 2011.

E. Feilden, E. G. Blanca, .. Giuliani, F. Saiz, E. Vandeperre et al., Robocasting of structural ceramic parts with hydrogel inks, J. Eur. Ceram. Soc, vol.36, pp.2525-2533, 2016.

G. Fernandez-de-grado, L. Keller, Y. Idoux-gillet, Q. Wagner, A. Musset et al., Bone substitutes: a review of their characteristics, clinical use, and perspectives for large bone defects management, J. Tissue Eng, vol.9, pp.1-18, 2018.

L. C. Gerhardt and A. R. Boccaccini, Bioactive glass and glass-ceramic scaffolds for bone tissue engineering, Materials, vol.3, pp.3867-3910, 2010.

P. V. Giannoudis, T. A. Einhorn, G. Schmidmaier, D. Marsh, C. ;--x-gjerde et al., Cell therapy induced regeneration of severely atrophied mandibular bone in a clinical trial, Stem Cell Res. Ther, vol.39, p.213, 2008.

E. Gomez-barrena, P. Rosset, F. Gebhard, P. Hernigou, N. Baldini et al., Feasibility and safety of treating non-unions in tibia, femur and humerus with autologous, expanded, bone marrow-derived mesenchymal stromal cells associated with biphasic calcium phosphate biomaterials in a multicentric, non-comparative trial, Biomaterials, vol.196, pp.100-108, 2019.
URL : https://hal.archives-ouvertes.fr/inserm-01782929

E. Gomez-barrena, P. Rosset, I. Muller, R. Giordano, C. Bunu et al., Bone regeneration: stem cell therapies and clinical studies in orthopaedics and traumatology, Clin. Orthop. Relat. Res, vol.15, pp.164-171, 2006.

M. Gruene, C. Unger, L. Koch, A. Deiwick, and B. Chichkov, Dispensing pico to nanolitre of a natural hydrogel by laser-assisted bioprinting, Biomed. Eng. Online, vol.10, p.19, 2011.

W. Han, J. Shen, H. Wu, S. Yu, J. Fu et al., Induced membrane technique: advances in the management of bone defects, Int. J. Surg, vol.42, pp.110-116, 2017.

H. Hattori, J. Mibe, and K. Yamamoto, Modular megaprosthesis in metastatic bone disease of the femur, Orthopedics, vol.34, pp.871-876, 2011.

M. Heliotis, K. M. Lavery, U. Ripamonti, E. Tsiridis, and L. Di-silvio, Transformation of a prefabricated hydroxyapatite/osteogenic protein-1 implant into a vascularised pedicled bone flap in the human chest, Int. J. Oral Maxillofac. Surg, vol.35, pp.265-269, 2006.

D. A. Hidalgo and A. L. Pusic, Free-flap mandibular reconstruction: a 10-year follow-up study, Plast. Reconstr. Surg, vol.110, pp.438-451, 2002.

S. W. Hock, D. A. Johnson, and M. A. Van-veen, Print Quality Optimization for a Color Ink Jet Printer by Using a Larger Nozzle for the Black Ink Only, 1996.

S. Holl, A. Schlomberg, G. Gosheger, R. Dieckmann, A. Streitbuerger et al., Distal femur and proximal tibia replacement with megaprosthesis in revision knee arthroplasty: a limb-saving procedure, Knee Surg. Sports Traumatol. Arthrosc, vol.20, pp.2513-2518, 2012.

K. R. Hudson, P. B. Cowan, and J. S. Gondek, Ink Drop Volume Variance Compensation for Inkjet Printing, 2000.

G. A. Ilizarov, Clinical application of the tension-stress effect for limb lengthening, Clin. Orthop. Relat. Res, vol.250, pp.8-26, 1990.

M. U. Jawad and E. W. Brien, Proximal femoral reconstruction with a constrained acetabulum in oncologic patients, Orthopedics, vol.37, pp.187-193, 2014.

L. Jeys and R. Grimer, The long-term risks of infection and amputation with limb salvage surgery using endoprostheses, Treatment of Bone and Soft Tissue Sarcomas, pp.75-84, 2009.

L. M. Jeys, R. J. Grimer, S. R. Carter, and R. M. Tillman, Periprosthetic infection in patients treated for an orthopaedic oncological condition, J. Bone Joint Surg. Am, vol.87, pp.842-849, 2005.

K. Ji, Y. Wang, Q. Wei, K. Zhang, A. Jiang et al., Application of 3D printing technology in bone tissue engineering, Biodes. Manuf, vol.1, pp.203-210, 2018.

C. T. Kao, C. C. Lin, Y. W. Chen, C. H. Yeh, H. Y. Fang et al., Poly(dopamine) coating of 3D printed poly(lactic acid) scaffolds for bone tissue engineering, Mater. Sci. Eng. C Mater. Biol. Appl, vol.56, pp.165-173, 2015.

L. Karalashvili, N. Chichua, G. Menabde, L. Atskvereli, and T. Grdzelidze, Decellularized bovine bone graft for zygomatic bone reconstruction, Med. Case Rep, vol.4, p.52, 2017.

, Frontiers in Bioengineering and Biotechnology | www.frontiersin.org

J. F. Keating and M. M. Mcqueen, Substitutes for autologous bone graft in orthopaedic trauma, J. Bone Joint Surg. Br, vol.83, pp.3-8, 2001.

U. Klammert, U. Gbureck, E. Vorndran, J. Rodiger, P. Meyer-marcotty et al., 3D powder printed calcium phosphate implants for reconstruction of cranial and maxillofacial defects, J. Craniomaxillofac. Surg, vol.38, pp.565-570, 2010.

U. Klammert, E. Vorndran, T. Reuther, F. A. Muller, K. Zorn et al., Low temperature fabrication of magnesium phosphate cement scaffolds by 3D powder printing, J. Mater. Sci. Mater. Med, vol.21, pp.2947-2953, 2010.

H. Kokemueller, S. Spalthoff, M. Nolff, F. Tavassol, H. Essig et al., Prefabrication of vascularized bioartificial bone grafts in vivo for segmental mandibular reconstruction: experimental pilot study in sheep and first clinical application, Int. J. Oral Maxillofac. Surg, vol.39, pp.379-387, 2010.

D. B. Kolesky, R. L. Truby, A. S. Gladman, T. A. Busbee, K. A. Homan et al., 3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs, Adv. Mater, vol.26, pp.3124-3130, 2014.

T. Kurien, R. G. Pearson, and B. E. Scammell, Bone graft substitutes currently available in orthopaedic practice, Bone Joint J, vol.95, pp.583-597, 2013.

C. Laurencin, Y. Khan, and J. Veronick, Bone graft substitutes: past, present and future, pp.1-9, 2014.

C. K. Ledford, J. A. Nunley, . Ii, N. A. Viens, and R. K. Lark, Bovine xenograft failures in pediatric foot reconstructive surgery, J. Pediatr. Orthop, vol.33, pp.458-463, 2013.

K. Y. Lee, M. Park, H. M. Kim, Y. J. Lim, H. J. Chun et al., Ceramic bioactivity: progresses, challenges and perspectives, Biomed. Mater, vol.1, pp.31-37, 2006.

J. A. Lewis, Direct ink writing of 3D functional materials, Adv. Funct. Mater, vol.16, pp.2193-2204, 2006.

J. A. Lewis, J. E. Smay, J. Stuecker, and J. Cesarano, Direct ink writing of three-dimensional ceramic structures, J. Am. Ceram. Soc, vol.89, pp.3599-3609, 2006.

H. Liao, K. Chang, Y. Jiang, J. Chen, and M. Lee, Fabrication of tissue engineered PCL scaffold by selective laser-sintered machine for osteogeneisis of adipose-derived stem cells, Virtual Phys. Protoyp, vol.6, pp.57-60, 2011.

I. Lodoso-torrecilla, N. A. Van-gestel, L. Diaz-gomez, E. C. Grosfeld, K. Laperre et al., Multimodal pore formation in calcium phosphate cements, J. Biomed. Mater. Res. A, vol.106, pp.500-509, 2018.

C. Mandrycky, Z. Wang, K. Kim, and D. Kim, 3D bioprinting for engineering complex tissues, Biotechnol. Adv, vol.34, pp.422-434, 2016.

H. J. Mankin, M. C. Gebhardt, L. C. Jennings, D. S. Springfield, and W. W. Tomford, Long-term results of allograft replacement in the management of bone tumors, Clin. Orthop. Relat. Res, vol.324, pp.86-97, 1996.

A. C. Masquelet, Muscle reconstruction in reconstructive surgery: soft tissue repair and long bone reconstruction, Langenbecks Arch. Surg, vol.388, pp.344-346, 2003.

A. C. Masquelet and T. Begue, The concept of induced membrane for reconstruction of long bone defects, Orthop. Clin. North Am, vol.41, pp.27-37, 2010.

A. C. Masquelet, F. Fitoussi, T. Begue, and G. P. Muller, Reconstruction of the long bones by the induced membrane and spongy autograft, Ann. Chir. Plast. Esthet, vol.45, pp.346-353, 2000.

L. Mathieu, E. Bilichtin, M. Durand, N. Escalopier, J. C. Murison et al., Masquelet technique for open tibia fractures in a military setting, Eur. J. Trauma Emerg. Surg, vol.24, pp.1-7, 2019.

H. Matsubara, D. E. Hogan, E. F. Morgan, D. P. Mortlock, T. A. Einhorn et al., Vascular tissues are a primary source of BMP2 expression during bone formation induced by distraction osteogenesis, Bone, vol.51, pp.168-180, 2012.

A. Mazzoli, Selective laser sintering in biomedical engineering, Med. Biol. Eng. Comput, vol.51, pp.245-256, 2013.

A. E. Mercado-pagan, A. M. Stahl, Y. Shanjani, Y. , and Y. , , 2015.

, Vascularization in bone tissue engineering constructs, Ann. Biomed. Eng, vol.43, pp.718-729

K. Mesimaki, B. Lindroos, J. Tornwall, J. Mauno, C. Lindqvist et al., Novel maxillary reconstruction with ectopic bone formation by GMP adipose stem cells, Int. J. Oral Maxillofac. Surg, vol.38, pp.201-209, 2009.

S. Michna, W. Wu, and J. A. Lewis, Concentrated hydroxyapatite inks for direct-write assembly of 3D periodic scaffolds, Biomaterials, vol.26, pp.5632-5639, 2005.

P. Miranda, E. Saiz, K. Gryn, and A. P. Tomsia, Sintering and robocasting of ?-tricalcium phosphate scaffolds for orthopaedic applications, Acta Biomater, vol.2, pp.457-466, 2006.

F. Mittermayer, P. Krepler, M. Dominkus, E. Schwameis, M. Sluga et al., Long-term followup of uncemented tumor endoprostheses for the lower extremity, Clin. Orthop. Relat. Res, vol.388, pp.167-177, 2001.

R. J. Mondschein, A. Kanitkar, C. B. Williams, S. S. Verbridge, and T. E. Long, Polymer structure-property requirements for stereolithographic 3D printing of soft tissue engineering scaffolds, Biomaterials, vol.140, pp.170-188, 2017.

S. L. Moran, K. Bakri, S. Mardini, A. Y. Shin, and A. T. Bishop, The use of vascularized fibular grafts for the reconstruction of spinal and sacral defects, Microsurgery, vol.29, pp.393-400, 2009.

I. Morelli, L. Drago, D. A. George, E. Gallazzi, S. Scarponi et al., Masquelet technique: myth or reality? A systematic review and metaanalysis, Injury, vol.47, issue.16, pp.30842-30847, 2016.

S. V. Murphy, A. , and A. , 3D bioprinting of tissues and organs, Nat. Biotechnol, vol.32, p.773, 2014.

D. L. Muscolo, M. A. Ayerza, L. Aponte-tinao, M. Ranalletta, A. et al., Intercalary femur and tibia segmental allografts provide an acceptable alternative in reconstructing tumor resections, Clin. Orthop. Relat. Res, vol.426, pp.97-102, 2004.

A. Ogose, N. Kondo, H. Umezu, T. Hotta, H. Kawashima et al., Histological assessment in grafts of highly purified beta-tricalcium phosphate (OSferion R ) in human bones, Biomaterials, vol.27, pp.1542-1549, 2006.

K. Ogura, M. Sakuraba, S. Miyamoto, T. Fujiwara, H. Chuman et al., Pelvic ring reconstruction with a double-barreled free vascularized fibula graft after resection of malignant pelvic bone tumor, Arch. Orthop. Trauma Surg, vol.135, pp.619-625, 2015.

J. S. Orringer, W. W. Shaw, L. J. Borud, E. G. Freymiller, S. A. Wang et al., Total mandibular and lower lip reconstruction with a prefabricated osteocutaneous free flap, Plast. Reconstr. Surg, vol.104, pp.793-797, 1999.

A. Oryan, S. Alidadi, and A. Moshiri, Current concerns regarding healing of bone defects, Hard Tissue, vol.2, p.13, 2013.

A. Oryan, S. Alidadi, A. Moshiri, and N. Maffulli, Bone regenerative medicine: classic options, novel strategies, and future directions, J. Orthop. Surg. Res, vol.9, p.18, 2014.

I. T. Ozbolat and M. Hospodiuk, Current advances and future perspectives in extrusion-based bioprinting, Biomaterials, vol.76, pp.321-343, 2016.

E. Pala, G. Trovarelli, T. Calabro, A. Angelini, C. N. Abati et al., Survival of modern knee tumor megaprostheses: failures, functional results, and a comparative statistical analysis, Clin. Orthop. Relat. Res, vol.473, pp.891-899, 2015.

S. N. Parikh, Bone graft substitutes: past, present, future, J. Postgrad. Med, vol.48, pp.142-148, 2002.

S. A. Park, H. J. Lee, K. S. Kim, S. J. Lee, J. T. Lee et al., In vivo evaluation of 3D-printed polycaprolactone scaffold implantation combined with beta-TCP powder for alveolar bone augmentation in a beagle defect model, Materials, vol.11, p.238, 2018.

S. Patil, J. Auyeung, and A. Gower, Outcome of subtalar fusion using bovine cancellous bone graft: a retrospective case series, J. Foot Ankle Surg, vol.50, pp.388-390, 2011.

N. Paxton, W. Smolan, T. Böck, F. Melchels, J. Groll et al., Proposal to assess printability of bioinks for extrusion-based bioprinting and evaluation of rheological properties governing bioprintability, Biofabrication, vol.9, p.44107, 2017.

P. H. Pelissier, A. C. Masquelet, R. Bareille, S. M. Pelissier, A. et al., Induced membranes secrete growth factors including vascular and osteoinductive factors and could stimulate bone regeneration, J. Orthop. Res, vol.22, pp.73-79, 2004.

X. Peng, C. Mao, G. Y. Yu, C. B. Guo, M. X. Huang et al., Maxillary reconstruction with the free fibula flap, Plast. Reconstr. Surg, vol.115, pp.1562-1569, 2005.

P. E. Petrochenko, J. Torgersen, P. Gruber, L. A. Hicks, J. Zheng et al., Laser 3D printing with sub-microscale resolution of porous elastomeric scaffolds for supporting human bone stem cells, Adv. Healthc. Mater, vol.4, pp.739-747, 2015.

M. Putzier, P. Strube, J. F. Funk, C. Gross, H. J. Monig et al., Allogenic versus autologous cancellous bone in lumbar segmental spondylodesis: a randomized prospective study, Eur. Spine J, vol.18, pp.687-695, 2009.

M. Rizzo and S. L. Moran, Vascularized bone grafts and their applications in the treatment of carpal pathology, Semin. Plast. Surg, vol.22, pp.213-227, 2008.

L. M. Rodríguez-lorenzo, M. Vallet-regí, and J. M. Ferreira, Colloidal processing of hydroxyapatite, Biomaterials, vol.22, pp.366-365, 2001.

H. Saijo, K. Igawa, Y. Kanno, Y. Mori, K. Kondo et al., Maxillofacial reconstruction using custom-made artificial bones fabricated by inkjet printing technology, J. Artif. Organs, vol.12, pp.200-205, 2009.

E. Saito, D. Suarez-gonzalez, W. L. Murphy, and S. J. Hollister, Biomineral coating increases bone formation by ex vivo BMP-7 gene therapy in rapid prototyped poly(L-lactic acid) (PLLA) and poly(epsilon-caprolactone) (PCL) porous scaffolds, Adv. Healthc. Mater, vol.4, pp.621-632, 2015.

S. Samavedi, A. R. Whittington, and A. S. Goldstein, Calcium phosphate ceramics in bone tissue engineering: a review of properties and their influence on cell behavior, Acta Biomater, vol.9, pp.8037-8045, 2013.

A. Sanan and S. J. Haines, Repairing holes in the head: a history of cranioplasty, Neurosurgery, vol.40, pp.588-603, 1997.

M. Scaglione, L. Fabbri, D. Dell'omo, F. Gambini, G. et al., Long bone nonunions treated with autologous concentrated bone marrow-derived cells combined with dried bone allograft, Musculoskelet. Surg, vol.98, pp.101-106, 2014.

A. Shehadeh, J. Noveau, M. Malawer, and R. Henshaw, Late complications and survival of endoprosthetic reconstruction after resection of bone tumors, Clin. Orthop. Relat. Res, vol.468, pp.2885-2895, 2010.

N. Shibuya, D. C. Jupiter, L. D. Clawson, L. Fontaine, and J. , Incorporation of bovine-based structural bone grafts used in reconstructive foot surgery, 2012.

, J. Foot Ankle Surg, vol.51, pp.30-33

R. Sivakumar, M. G. Mohideen, M. Chidambaram, T. Vinoth, P. K. Singhi et al., Management of large bone defects in diaphyseal fractures by induced membrane formation by Masquelet's technique, J. Orthop. Case Rep, vol.6, pp.59-62, 2016.

B. Spiegelberg, T. Parratt, S. K. Dheerendra, W. S. Khan, R. Jennings et al., Ilizarov principles of deformity correction, Ann. R. Coll. Surg. Engl, vol.92, pp.101-105, 2010.

J. Stanovici, L. R. Le-nail, M. A. Brennan, L. Vidal, V. Trichet et al., Bone regeneration strategies with bone marrow stromal cells in orthopaedic surgery, Curr. Res. Transl. Med, vol.64, pp.83-90, 2016.
URL : https://hal.archives-ouvertes.fr/inserm-01702061

J. Suwanprateeb, R. Sanngam, W. Suvannapruk, and T. Panyathanmaporn, Mechanical and in vitro performance of apatite-wollastonite glass ceramic reinforced hydroxyapatite composite fabricated by 3D-printing, 2009.

, J. Mater. Sci. Mater. Med, vol.20, pp.1281-1289

A. M. Tatara, M. E. Wong, and A. G. Mikos, In vivo bioreactors for mandibular reconstruction, J. Dent. Res, vol.93, pp.1196-1202, 2014.

G. I. Taylor, Reconstruction of the mandible with free composite iliac bone grafts, Ann. Plast. Surg, vol.9, pp.361-376, 1982.

G. I. Taylor, The current status of free vascularized bone grafts, Clin. Plast. Surg, vol.10, pp.185-209, 1983.

G. I. Taylor, Composite tissue transfer to the lower limb, Recent Adv. Plast. Surg, vol.3, pp.83-109, 1985.

G. I. Taylor, R. J. Corlett, A. , and M. W. , The evolution of free vascularized bone transfer: a 40-year experience, Plast. Reconstr. Surg, vol.137, pp.1292-1305, 2016.

G. I. Taylor, G. D. Miller, and F. J. Ham, The free vascularized bone graft. A clinical extension of microvascular techniques, Plast. Reconstr. Surg, vol.55, pp.533-544, 1975.

J. Torres, F. Tamimi, M. Alkhraisat, J. C. Prados-frutos, and E. Lopez-cabarcos, Bone substitutes, Implant Dentistry -The Most Promising Discipline of Dentistry, pp.4-105, 2011.

R. Trombetta, J. A. Inzana, E. M. Schwarz, S. L. Kates, and H. A. Awad, 3D printing of calcium phosphate ceramics for bone tissue engineering and drug delivery, Ann. Biomed. Eng, vol.45, pp.23-44, 2017.

C. Unger, M. Gruene, L. Koch, J. Koch, and B. N. Chichkov, Timeresolved imaging of hydrogel printing via laser-induced forward transfer, Appl. Phys. A, vol.103, pp.271-277, 2011.

J. P. Vacanti and R. Langer, Tissue engineering: the design and fabrication of living replacement devices for surgical reconstruction and transplantation, Lancet, vol.354, pp.32-34, 1999.

R. Verboket, M. Leiblein, C. Seebach, C. Nau, M. Janko et al., Autologous cell-based therapy for treatment of large bone defects: from bench to bedside, Eur. J. Trauma Emerg. Surg, vol.44, pp.649-665, 2018.

E. Vorndran, M. Klarner, U. Klammert, L. M. Grover, S. Patel et al., 3D Powder printing of ?-tricalcium phosphate ceramics using different strategies, Adv. Eng. Mater, vol.10, pp.67-71, 2008.

M. O. Wang, C. E. Vorwald, M. L. Dreher, E. J. Mott, M. Cheng et al., Evaluating 3D-printed biomaterials as scaffolds for vascularized bone tissue engineering, Adv. Mater, vol.27, pp.138-144, 2015.

P. H. Warnke, I. N. Springer, J. Wiltfang, Y. Acil, H. Eufinger et al., Growth and transplantation of a custom vascularised bone graft in a man, Lancet, vol.364, pp.766-770, 2004.

Y. Wen, S. Xun, M. Haoye, S. Baichuan, C. Peng et al., 3D printed porous ceramic scaffolds for bone tissue engineering: a review, Biomater. Sci, vol.5, pp.1690-1698, 2017.

J. Winder and R. Bibb, Medical rapid prototyping technologies: state of the art and current limitations for application in oral and maxillofacial surgery, 2005.

, J. Oral Maxillofac. Surg, vol.63, pp.1006-1015

A. Wubneh, E. K. Tsekoura, C. Ayranci, and H. Uludag, Current state of fabrication technologies and materials for bone tissue engineering, Acta Biomater, vol.80, pp.1-30, 2018.

N. Xu, X. Ye, D. Wei, J. Zhong, Y. Chen et al., 3D artificial bones for bone repair prepared by computed tomography-guided fused deposition modeling for bone repair, ACS Appl. Mater. Interfaces, vol.6, pp.14952-14963, 2014.

X. Yang, Z. Lu, H. Wu, W. Li, L. Zheng et al., Collagenalginate as bioink for three-dimensional (3D) cell printing based cartilage tissue engineering, Mater. Sci. Eng. C, vol.83, pp.195-201, 2018.

G. Zimmermann and A. Moghaddam, Allograft bone matrix versus synthetic bone graft substitutes, Injury, vol.42, pp.16-21, 2011.