J. De-man, P. Nuyts, G. Dupont, P. Marchal, and . Suetens, Reduction of metal streak artifacts in X-ray computed tomography using a transmission maximum a posteriori algorithm, IEEE Transactions on Nuclear Science, vol.47, issue.3, pp.977-981, 2000.
DOI : 10.1109/23.856534

G. Wang, D. L. Snyder, J. A. Sullivan, and M. W. Vannier, Iterative deblurring for CT metal artifact reduction, IEEE Transactions on Medical Imaging, vol.15, issue.5, pp.657-664, 1996.
DOI : 10.1109/42.538943

F. Williamson, B. R. Whiting, J. Benac, R. J. Murphy, J. A. O-'sullivan et al., Prospects for quantitative computed tomography imaging in the presence of foreign metal bodies using statistical image reconstruction, Medical Physics, vol.9, issue.10, pp.29-2404, 2002.
DOI : 10.1118/1.1509443

X. M. Zhang, J. Wang, and L. Xing, Metal artifact reduction in x-ray computed tomography (CT) by constrained optimization, Medical Physics, vol.59, issue.2, pp.701-711, 2011.
DOI : 10.1002/cpa.20124

A. Kalender, R. Hebel, and J. Ebersberger, Reduction of CT artifacts caused by metallic implants., Radiology, vol.164, issue.2, pp.576-577, 1987.
DOI : 10.1148/radiology.164.2.3602406

Y. Zhao, K. T. Bae, B. Whiting, and G. Wang, A wavelet method for metal artifact reduction with multiple metallic objects in the field of view, J. X-ray. Sci. Technol, vol.10, pp.67-76, 2002.

W. Gu, L. Zhang, G. Q. Yu, Y. X. Xing, and Z. Q. Chen, X-ray CT metal artifacts reduction through curvature based sinogram inpainting, J. X-ray. Sci. Technol, vol.14, pp.73-82, 2006.

J. Bertram, D. Wiegert, T. Schäfer, G. Aach, and . Rose, Directional View Interpolation for Compensation of Sparse Angular Sampling in Cone-Beam CT, IEEE Transactions on Medical Imaging, vol.28, issue.7, pp.1011-1022, 2009.
DOI : 10.1109/TMI.2008.2011550

X. Yan, S. Mou, Q. Tang, M. Xu, and . Zankl, Projection correlation based view interpolation for cone beam CT: primary fluence restoration in scatter measurement with a moving beam stop array, Physics in Medicine and Biology, vol.55, issue.21, pp.6350-6375, 2010.
DOI : 10.1088/0031-9155/55/21/002

J. H. Wouter, R. M. Veldkamp, A. J. Joemai, J. Van-der-molen, and . Geleijns, Development and validation of segmentation and interpolation techniques in sinogram for metal artifact suppression in CT, Med. Phys, vol.37, issue.2, pp.620-628, 2010.

*. , C. Xu, F. Verhaegen, D. Laurendeau, S. A. Enger et al., 39 oral: An Algorithm for Efficient Metal Artifact Reductions in Permanent Seed Implants, Radiotherapy and Oncology, vol.91, issue.1, pp.47-56, 2011.
DOI : 10.1016/S0167-8140(15)34297-3

M. S. Raoul, P. W. Joemai, . De-bruini, J. H. Wouter, J. Veldkamp et al., Metal artifact reduction for CT: Development, implementation, and clinical comparison of a generic and a scanner-specific technique, Med. Phys, vol.39, issue.2, pp.1125-1132, 2012.

I. Kratz, T. M. Weyers, and . Buzug, A fully 3D approach for metal artifact reduction in computed tomography, Medical Physics, vol.26, issue.11, pp.5-7042, 2012.
DOI : 10.1109/MSP.2008.930649

M. Bal and L. Spies, Metal artifact reduction in CT using tissue-class modeling and adaptive prefiltering, Medical Physics, vol.14, issue.8, pp.2852-2859, 2006.
DOI : 10.1088/0031-9155/49/24/001

J. Müller and T. M. Buzug, Spurious structures created by interpolation-based CT metal artifact reduction, Medical Imaging 2009: Physics of Medical Imaging, pp.1-1, 2009.
DOI : 10.1117/12.813515

R. Meyer, M. Raupach, B. Lell, M. Schmidt, and . Kachelrieß, Normalized metal artifact reduction (NMAR) in computed tomography

C. T. Wu, S. J. Shih, T. C. Chang, J. Y. Huang, T. H. Sun et al., Metal artifact reduction algorithm based on model images and spatial information, Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, vol.652, issue.1, pp.602-605, 2011.
DOI : 10.1016/j.nima.2011.01.041

P. Karimi and . Cosman, Segmentation of artifacts and anatomy in CT metal artifact reduction, Medical Physics, vol.2, issue.8, pp.5857-5868, 2012.
DOI : 10.1097/00004728-197801000-00017

5. , F. E. Boas, and D. Fleischmann, Evaluation of two iterative techniques for reducing metal artifacts in computed tomography, Radiology, vol.259, pp.894-902, 2011.

Y. Jeong and J. B. Ra, Reduction of artifacts due to multiple metallic objects in computed tomography, Medical Imaging 2009: Physics of Medical Imaging, pp.72583-2009, 2009.
DOI : 10.1117/12.811792

Y. Prell, M. Kyrikou, W. Beister, and . Kalender, A novel forward projection-based metal artifact reduction method for flat-detector computed tomography, Physics in Medicine and Biology, vol.54, issue.21, pp.6575-6591, 2009.
DOI : 10.1088/0031-9155/54/21/009

Y. Prell, T. Kyrikou, A. Struffert, W. A. Dörfler, and . Kalender, Metal Artifact Reduction for Clipping and Coiling in Interventional C-Arm CT, American Journal of Neuroradiology, vol.31, issue.4, pp.634-639, 2010.
DOI : 10.3174/ajnr.A1883

J. C. Xia, L. Roeske, C. A. Yu, A. J. Pelizzari, X. Mundt et al., A hybrid approach to reducing computed tomography metal artifacts in intracavitary brachytherapy, Brachytherapy, vol.4, issue.1, pp.18-23, 2005.
DOI : 10.1016/j.brachy.2004.11.001

M. Oehler and T. M. Buzug, The k-MLEM Algorithm: An iterative reconstruction technique for metal artifact reduction in CT images, Advances in Medical Engineering, pp.42-47, 2007.

C. Aootaphao, S. Pintavirooj, and . Sotthivirat, Penalized-likelihood reconstruction for metal artifact reduction in cone-beam CT, 2008 30th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, pp.733-2736, 2008.
DOI : 10.1109/IEMBS.2008.4649767

5. , C. Lemmens, D. Faul, and J. Nuyts, Suppression of metal artifacts in CT using a reconstruction procedure that combines MAP and projection completion, IEEE Trans. Med. Imag, vol.28, issue.2, pp.250-260, 2009.

V. Slambrouck and J. Nuyts, Metal artifact reduction in computed tomography using local models in an image block-iterative scheme, Medical Physics, vol.49, issue.4, pp.7080-7092, 2012.
DOI : 10.1109/23.958379

H. Zhang, X. Yan, J. Jia, S. B. Yang, X. Jiang et al., A hybrid metal artifact reduction algorithm for x-ray CT, Medical Physics, vol.41, issue.4
DOI : 10.1109/23.322963

I. Naidu, S. Bechwati, S. Karimi, C. Simanovsky, and . Crawford, Method of and system for reducing metal artifacts in images generated by x-ray scanning devices, U.S. patent, vol.6721, p.387, 2004.

D. Man, CATSIM: A new computer assisted tomography simulation environment, Proc. SPIE 6510, 2007.

Z. Chen, L. Yang, W. Luo, and . Chen, Thoracic low-dose CT image processing using an artifact suppressed large-scale nonlocal means, Physics in Medicine and Biology, vol.57, issue.9, pp.2667-2688, 2012.
DOI : 10.1088/0031-9155/57/9/2667

URL : https://hal.archives-ouvertes.fr/inserm-00677979